MikroTik/RouterBOARD SXT LTE kit
  • MikroTik/RouterBOARD SXT LTE kit
  • MikroTik/RouterBOARD SXT LTE kit

SXT LTE6 kit

2 016,00 kr
Exkl. moms 1-3
Kvantitet
I Lager

  • Order vardag innan 12.00 skickas normalt samma dag med POSTNORD Order vardag innan 12.00 skickas normalt samma dag med POSTNORD
  • Alla returer ska godkännas innan via E-post info@shlab.se Alla returer ska godkännas innan via E-post info@shlab.se

SXT LTE6 kit

SXT LTE6 kit is a device for remote locations that are within cellular network coverage. Due to its advanced LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones fail.

The new SXT LTE6 features a CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. We have seen Internet speed doubling in rural areas after switching to CAT6, so there is no need to wait for cable network expansions.

The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. It also has two Micro SIM slots for backup link. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant.


SXT LTE6 kit is a device for remote locations that are within cellular network coverage. Due to its advanced LTE chip design and high gain antenna, it can provide connectivity for your building even where cell phones fail.

The new SXT LTE6 features a CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. We have seen Internet speed doubling in rural areas after switching to CAT6, so there is no need to wait for cable network expansions.

The unit is equipped with two Ethernet ports (the second port has PoE-out functionality), so you can use it to power up another device. It also has two Micro SIM slots for backup link. Unit is shipped with a 24 V power supply, but can support full range 18-57 V and is 802.3af/at compliant.

Specifications

Details
Product code RBSXTR&R11e-LTE6
Architecture MIPSBE
CPU QCA9531
CPU core count 1
CPU nominal frequency 650 MHz
License level 3
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
Tested ambient temperature -30°C to 60°C

Powering

Details
PoE in 802.3af/at
PoE in input Voltage 12-57 V
PoE out Passive PoE up to 57V
PoE-out ports Ether2
Number of DC inputs 1 (PoE-IN)
Max out per port output (input > 30 V) 400 mA
Max out per port output (input < 30 V) 600 mA
Max total out (A) 600 mA

Mobile

Details
2G Category Class12
3G Category R7 (21Mbps Downlinks, 5.76Mbps Uplink) / R8 (42.2Mbps Downlink, 5.76Mbps Uplink)
LTE Category 6 (300Mbit/s Downlink, 50Mbit/s Uplink)
LTE FDD bands 1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 5 (850MHz) / 12 (700MHz) / 17 (700MHz) / 25 (1900MHz) / 26 (850MHz)
LTE TDD bands 38 (2600MHz) / 40 (2300MHz) / 39 (1900MHz) / 41n (2500MHz)
2G bands 2 (1900MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz)
3G bands 1 (2100MHz) / 2 (1900MHz) / 5 (850MHz) / 8 (900MHz)

Ethernet

Details
10/100 Ethernet ports 2

Peripherals

Details
Number of SIM slots 2 Modem (Micro SIM)
MiniPCI-e slots 1

Other

Details
Mode button Yes

Certification & Approvals

Details
Certification CE/RED, EAC, ROHS

Ethernet test results

RBSXTR&R11e-LTE6r2 QCA9531 100M two port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 16.3 197.9 47.0 192.5 297.6 152.4
Bridging 25 bridge filter rules 16.3 197.9 47.0 192.5 80.4 41.2
Routing none (fast path) 16.3 197.9 47.0 192.5 233.1 119.3
Routing 25 simple queues 16.3 197.9 47.0 192.5 131.4 67.3
Routing 25 ip filter rules 16.3 197.9 47.0 192.5 49.1 25.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Included parts


MikroTik
RBSXTR&R11e-LTE6
19 objekt
2019-12-17

Du kanske också gillar