Cloud Core Router CCR1009-7G-1C-1S+PC
    • Cloud Core Router CCR1009-7G-1C-1S+PC
    • Cloud Core Router CCR1009-7G-1C-1S+PC

    CCR1009-7G-1C-1S+PC

    4 097,41 kr
    Exkl. moms 1-3

    Cloud Core Router 1009-7G-1C-1S+PC with Tilera Tile-Gx9 CPU (9-cores, 1.0Ghz per core), 2GB RAM, 1xSFP combo, 1x SFP+
    cage, 7xGbit LAN, RouterOS L6, 1U rackmount case, LCD panel

    Kvantitet
    Sista produkten i lager

     

    Order vardag före 12.00 går normalt samma dag med Postnord. Fri frakt över 4000kr

     

    All retur ska godkännas av oss sänd mail till info@shlab.se

    CCR1009-7G-1C-1S+PC

    The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.

    Important changes

    No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.

    Combo-port - a single 1Gbit software interface that has two hardware interfaces - a SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. Port also allows to switch from one to another interface from software, or in event of disconnect, providing new, unique hardware fail-over feature.

    100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.

    More throughput - due to how ports are connected to CPU, new CCR1009 models can achieve higher theoretical throughput.

    This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24v 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.

    Unit also includes a LCD touchscreen, smart card slot, microSD and a SFP+ port for 10G connections.

    Product specifications

    Details
    Product codeCCR1009-7G-1C-1S+PC
    CPU nominal frequency1 GHz
    CPU core count9
    Size of RAM2 GB
    10/100/1000 Ethernet ports7
    Number of USB ports1
    Power Jack1
    Supported input voltage14 V - 57 V
    PoE inYes
    Voltage MonitorYes
    CPU temperature monitorYes
    PCB temperature monitorYes
    Dimensions272x190x47mm
    Operating SystemRouterOS
    License level6
    Current MonitorYes
    CPUTLR4-00980CH-10CE-A3b
    Max Power consumption33W
    SFP+ ports1
    USB slot typemicroUSB type AB
    USB Power ResetYes
    Serial portRS232
    Storage typeNAND
    Storage size128 MB
    CPU Threads count9

    Included parts

    Ethernet test results

    CCR1009-7G-1C-1S+PCTile 9 core all port test 1GHz with combo-port and SFP+
    ModeConfiguration1518 byte512 byte64 byte
    kppsMbpskppsMbpskppsMbps
    Bridgingnone (fast path)1,300.415,792.13,759.415,398.514,874.07,615.5
    Bridging25 bridge filter rules1,100.413,363.31,183.84,848.81,184.0606.2
    Routingnone (fast path)1,300.415,792.13,759.415,398.514,581.07,465.5
    Routing25 simple queues1,300.415,792.11,686.07,175.61,699.61,142.1
    Routing25 ip filter rules615.87,478.3660.92,812.8668.3449.1
    1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
    2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
    3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
    4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
    MikroTik
    m ccr1009-7G-1C-1S+PC
    1 Produkt
    2017-05-08

    Du kanske också gillar