> >RB912-5HPnD 5GHz AP/Accesspunkt

RB912-5HPnD 5GHz AP/Accesspunkt

Monterad RB912-5HPnD 5GHz AP/Accesspunkt

1 381,41 kr

Pack content

Låda för RB411/Rb711/Rb912

Nät aggregat 24v för routerboard 0,8A

Rundstrålande inomhus antenn till Mikrotik Routrar 2.4-5GHz med MMCX kontakt

OBS passar inte till RB751U-2HnD

The RB912UAG-5HPnD is a very versatile device. It is a small wireless router with an integrated high power wireless card and an additional miniPCIe slot for 802.11 wireless, or 3G card. The Gigabit port helps to utilize the full potential of 802.11n wireless speeds.

The integrated wireless card is capable of up to 1000mW output power. It has built in 16kV ESD protection on both the Ethernet and the MMCX ports

Product specifications

Details
Product codeRB912UAG-5HPnD
CPU nominal frequency600 MHz
CPU core count1
ArchitectureMIPS-BE
Size of RAM64 MB
10/100 Ethernet ports0
10/100/1000 Ethernet ports1
MiniPCI slots0
MiniPCI-e slots1
Wireless chip modelAR9342-BL1A
Wireless standards802.11a/n
Number of USB ports1
Memory CardsNo
Power Jack1
802.3af supportNo
Supported input voltage8 V - 30 V
PoE inYes
PoE outNo
Voltage MonitorYes
PCB temperature monitorYes
CPU temperature monitorNo
Dimensions105x105mm
Operating SystemRouterOS
Operating temperature range-40C to +70C
License level4
Antenna gain DBINo
Current MonitorNo
CPUAR9342-BL1A
Max Power consumption14W at 24v
SFP ports0
SFP+ ports0
USB slot typeUSB type A
Number of chains2
Serial portNone
Suggested price$79.00

Wireless specifications

5 GHz
TXRX
6MBit/s30-96
54MBit/s27-78
MCS030-96
MCS726-75

Performance test results

RB912UAG-5HPnDAR9342 1G 1 port test
ModeConfiguration64 byte512 byte1518 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)269.6176.9232.0983.781.0995.3
Bridging25 bridge filter rules87.657.586.0364.681.0995.3
Routingnone (fast path)226.9148.8210.0890.481.0995.3
Routing25 simple queues106.669.9103.9440.581.0995.3
Routing25 ip filter rules60.539.759.6252.756.8698.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results