MikroTik/RouterBOARD cAP lite

m RBcAPL-2nD

Ny produkt

Low-cost dual-chain 2.4GHz AP with wall and ceiling enclosure

Mer detaljer

3 objekt

I Lager

Klarna Från 24,00 kr /mån

322,80 kr exkl. moms.

Lägg till i önskelistan

Mer information

The cAP lite is a tiny access point device, perfect for public locations and hospitality businesses like hotels, airports, shopping malls etc. Included with the product are two different casings, which can easily be swapped out, or, if you really like to fit the design with the environment, we are providing 3D printer friendly design files.

The cAP lite supports 802.11b/g/n and can be powered by power over ethernet. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand alone access point with the full potential of RouterOS.

Product specifications

Details
Product codeRBcAPL-2nD
CPU nominal frequency650 MHz
CPU core count1
Size of RAM64 MB
10/100 Ethernet ports1
Wireless standards802.11b/g/n
Wireless chip modelQCA9533
Supported input voltage5 V - 60 V
PoE in802.3af/at
DimensionsWall case: 88 x 52 x 20 mm Ceiling case: ⌀88 mm x 20 mm
Operating SystemRouterOS
Tested ambient temperature-40°C .. +70°C
License level4
Antenna gain DBI1.5
CPUQCA9533
Max Power consumption4W
Number of chains2
Storage typeFLASH
Storage size16 MB

Wireless specifications

2.4 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
1MBit/s22-96158
11MBit/s22-89158
6MBit/s20-93100
54MBit/s18-7463
MCS020-93100
MCS716-7140

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Ethernet test results

RBcAPL-2nDQCA9533 100M one port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)8.198.423.596.3173.688.9
Bridging25 bridge filter rules8.198.423.596.370.936.3
Routingnone (fast path)8.198.423.596.3160.882.3
Routing25 simple queues8.198.423.596.390.846.5
Routing25 ip filter rules8.198.423.596.343.222.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Omdömen

Det finns inga kundrecensioner just nu.

Skriv din recension

MikroTik/RouterBOARD cAP lite

MikroTik/RouterBOARD cAP lite

Low-cost dual-chain 2.4GHz AP with wall and ceiling enclosure

29 andra produkter i samma kategori:

Kunder som köpt denna produkt köpte också:

MikroTik/RouterBOARD cAP lite <p>The cAP lite is a tiny access point device, perfect for public locations and hospitality businesses like hotels, airports, shopping malls etc. Included with the product are two different casings, which can easily be swapped out, or, if you really like to fit the design with the environment, we are providing 3D printer friendly design files.</p> <p>The cAP lite supports 802.11b/g/n and can be powered by power over ethernet. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand alone access point with the full potential of RouterOS.</p> <h1 id="spec">Product specifications</h1> <table class="parameters_table"><tbody><tr><th colspan="2">Details</th></tr><tr><td>Product code</td> <td>RBcAPL-2nD</td> </tr><tr><td>CPU nominal frequency</td> <td>650 MHz</td> </tr><tr><td>CPU core count</td> <td>1</td> </tr><tr><td>Size of RAM</td> <td>64 MB</td> </tr><tr><td>10/100 Ethernet ports</td> <td>1</td> </tr><tr><td>Wireless standards</td> <td>802.11b/g/n</td> </tr><tr><td>Wireless chip model</td> <td>QCA9533</td> </tr><tr><td>Supported input voltage</td> <td>5 V - 60 V</td> </tr><tr><td>PoE in</td> <td>802.3af/at</td> </tr><tr><td>Dimensions</td> <td>Wall case: 88 x 52 x 20 mm Ceiling case: ⌀88 mm x 20 mm</td> </tr><tr><td>Operating System</td> <td>RouterOS</td> </tr><tr><td>Tested ambient temperature</td> <td>-40°C .. +70°C</td> </tr><tr><td>License level</td> <td>4</td> </tr><tr><td>Antenna gain DBI</td> <td>1.5</td> </tr><tr><td>CPU</td> <td>QCA9533</td> </tr><tr><td>Max Power consumption</td> <td>4W</td> </tr><tr><td>Number of chains</td> <td>2</td> </tr><tr><td>Storage type</td> <td>FLASH</td> </tr><tr><td>Storage size</td> <td>16 MB</td> </tr></tbody></table><h1>Wireless specifications</h1> <table class="txtable"><tbody><tr><th colspan="3">2.4 GHz</th></tr><tr><th></th><th>Transmit power (dBm)</th><th>Receive Sensitivity</th><th>Transmit power (mW)</th></tr><tr><td>1MBit/s</td> <td>22</td> <td>-96</td> <td>158</td> </tr><tr><td>11MBit/s</td> <td>22</td> <td>-89</td> <td>158</td> </tr><tr><td>6MBit/s</td> <td>20</td> <td>-93</td> <td>100</td> </tr><tr><td>54MBit/s</td> <td>18</td> <td>-74</td> <td>63</td> </tr><tr><td>MCS0</td> <td>20</td> <td>-93</td> <td>100</td> </tr><tr><td>MCS7</td> <td>16</td> <td>-71</td> <td>40</td> </tr></tbody></table><p style="clear:both;font-style:italic;">wireless parameters may be limited in software, depending on your local regulatory limitations</p> <h1>Included parts</h1> <div id="incparts"> <div class="part_box"><a href="https://img.routerboard.com/mimg/part561484644280m.jpg" class="product_pop cboxElement"><img src="https://img.routerboard.com/mimg/part561484644280s.jpg" alt="" />Fastening set</a></div> <div class="part_box"><a href="https://img.routerboard.com/mimg/part571484644335m.jpg" class="product_pop cboxElement"><img src="https://img.routerboard.com/mimg/part571484644335s.jpg" alt="" />24V 0.2A power adapter</a></div> <div class="part_box"><a href="https://img.routerboard.com/mimg/part101391160012m.jpg" class="product_pop cboxElement"><img src="https://img.routerboard.com/mimg/part101391160012s.jpg" alt="" />PoE injector</a></div> </div> <h1 id="perf">Ethernet test results</h1> <table class="perf"><thead><tr><td colspan="2">RBcAPL-2nD</td> <td colspan="6">QCA9533 100M one port test</td> </tr><tr><td rowspan="2">Mode</td> <td rowspan="2">Configuration</td> <td colspan="2">1518 byte</td> <td colspan="2">512 byte</td> <td colspan="2">64 byte</td> </tr><tr><td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> </tr></thead><tbody><tr><td>Bridging</td> <td>none (fast path)</td> <td class="kpps size1518">8.1</td> <td class="mbps size1518">98.4</td> <td class="kpps size512">23.5</td> <td class="mbps size512">96.3</td> <td class="kpps size64">173.6</td> <td class="mbps size64">88.9</td> </tr><tr><td>Bridging</td> <td>25 bridge filter rules</td> <td class="kpps size1518">8.1</td> <td class="mbps size1518">98.4</td> <td class="kpps size512">23.5</td> <td class="mbps size512">96.3</td> <td class="kpps size64">70.9</td> <td class="mbps size64">36.3</td> </tr><tr><td>Routing</td> <td>none (fast path)</td> <td class="kpps size1518">8.1</td> <td class="mbps size1518">98.4</td> <td class="kpps size512">23.5</td> <td class="mbps size512">96.3</td> <td class="kpps size64">160.8</td> <td class="mbps size64">82.3</td> </tr><tr><td>Routing</td> <td>25 simple queues</td> <td class="kpps size1518">8.1</td> <td class="mbps size1518">98.4</td> <td class="kpps size512">23.5</td> <td class="mbps size512">96.3</td> <td class="kpps size64">90.8</td> <td class="mbps size64">46.5</td> </tr><tr><td>Routing</td> <td>25 ip filter rules</td> <td class="kpps size1518">8.1</td> <td class="mbps size1518">98.4</td> <td class="kpps size512">23.5</td> <td class="mbps size512">96.3</td> <td class="kpps size64">43.2</td> <td class="mbps size64">22.1</td> </tr></tbody></table><ol class="meta"><li>All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)</li> <li>Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes</li> <li>Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out</li> <li>Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results</li> </ol>
322,80 kr

Nerladdning