MikroTik/RouterBOARD RB1100AHx4 Router

m rb1100AHx4 tax

Ny produkt

1 Produkt

I Lager

Klarna Från 187,00 kr /mån

3 246,40 kr exkl. moms.

Lägg till i önskelistan

Mer information

Introducing RB1100AHx4, 13x Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbit. The device supports IPsec hardware acceleration (up to 2.2Gbps with AES128).

Unit comes with 1U rackmount case, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support).

General

Details
Product codeRB1100x4
CPUAL21400-1400-A0-E-1AN-8-C
CPU core count4
CPU nominal frequency1.4 GHz
CPU Threads count4
Dimensions444 x 148 x 47 mm
License level6
Operating SystemRouterOS
Size of RAM1 GB
Storage size128 MB
Storage typeNAND

Powering

Details
Max Power consumption20W
Number of DC inputs2 (PoE-IN, 2-pin terminal)
PoE in802.3af/at
PoE in input Voltage20-57 V
2-pin terminal input Voltage-48, 12-57 V
Number of AC inputs2
AC input range100-240 V

Ethernet

Details
10/100/1000 Ethernet ports13

Peripherals

Details
Serial portRS232

Other

Details
Current MonitorYes
PCB temperature monitorYes
Voltage MonitorYes

Ethernet test results

RB1100x4AL21400 1G all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)606.57,365.31,736.47,112.35,509.72,821.0
Bridging25 bridge filter rules606.57,365.31,107.84,537.51,153.2590.4
Routingnone (fast path)606.57,365.31,736.47,112.35092.32,607.3
Routing25 simple queues606.57,365.3933.63,824.0960.3491.7
Routing25 ip filter rules543.76,602.7561.82,301.1564.6289.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

RB1100x4RB1100AHx4 IPsec throughput
ModeConfiguration1400 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Single tunnelAES-128-CBC + SHA1122.01366.4124.9511.6127.065.0
256 tunnelsAES-128-CBC + SHA1192.72158.2200.5821.2203.4104.1
256 tunnelsAES-128-CBC + SHA256192.42154.9200.5821.2203.4104.1
256 tunnelsAES-256-CBC + SHA1180.02016.0188.2770.9190.397.4
256 tunnelsAES-256-CBC + SHA256180.02016.0188.2770.9190.397.4
256 tunnelsAES-128-GCM192.72158.2202.2828.2203.4104.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Omdömen

Det finns inga kundrecensioner just nu.

Skriv din recension

MikroTik/RouterBOARD RB1100AHx4 Router

MikroTik/RouterBOARD RB1100AHx4 Router

23 andra produkter i samma kategori:

Kunder som köpt denna produkt köpte också:

MikroTik/RouterBOARD RB1100AHx4 Router <p>Introducing RB1100AHx4, 13x Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbit. The device supports IPsec hardware acceleration (up to 2.2Gbps with AES128).</p> <p>Unit comes with 1U rackmount case, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support).</p> <div class="link-bar"> <ul class="important-links"><li><a href="https://i.mt.lv/routerboard/files/RB1100Dx4-170921143114.pdf"><img src="https://mikrotik.com/img/doclink.png" alt="" />Brochure</a></li> <li><a href="https://i.mt.lv/routerboard/files/rb1100Dx4-qg.pdf"><img src="https://mikrotik.com/img/doclink.png" alt="" />Quick Guide</a></li> </ul></div> <h4>General</h4> <table class="table product-table"><thead><tr><th colspan="2">Details</th></tr></thead><tbody><tr><td>Product code</td> <td>RB1100x4</td> </tr><tr><td>CPU</td> <td>AL21400-1400-A0-E-1AN-8-C</td> </tr><tr><td>CPU core count</td> <td>4</td> </tr><tr><td>CPU nominal frequency</td> <td>1.4 GHz</td> </tr><tr><td>CPU Threads count</td> <td>4</td> </tr><tr><td>Dimensions</td> <td>444 x 148 x 47 mm</td> </tr><tr><td>License level</td> <td>6</td> </tr><tr><td>Operating System</td> <td>RouterOS</td> </tr><tr><td>Size of RAM</td> <td>1 GB</td> </tr><tr><td>Storage size</td> <td>128 MB</td> </tr><tr><td>Storage type</td> <td>NAND</td> </tr></tbody></table><h4>Powering</h4> <table class="table product-table"><thead><tr><th colspan="2">Details</th></tr></thead><tbody><tr><td>Max Power consumption</td> <td>20W</td> </tr><tr><td>Number of DC inputs</td> <td>2 (PoE-IN, 2-pin terminal)</td> </tr><tr><td>PoE in</td> <td>802.3af/at</td> </tr><tr><td>PoE in input Voltage</td> <td>20-57 V</td> </tr><tr><td>2-pin terminal input Voltage</td> <td>-48, 12-57 V</td> </tr><tr><td>Number of AC inputs</td> <td>2</td> </tr><tr><td>AC input range</td> <td>100-240 V</td> </tr></tbody></table><h4>Ethernet</h4> <table class="table product-table"><thead><tr><th colspan="2">Details</th></tr></thead><tbody><tr><td>10/100/1000 Ethernet ports</td> <td>13</td> </tr></tbody></table><h4>Peripherals</h4> <table class="table product-table"><thead><tr><th colspan="2">Details</th></tr></thead><tbody><tr><td>Serial port</td> <td>RS232</td> </tr></tbody></table><h4>Other</h4> <table class="table product-table"><thead><tr><th colspan="2">Details</th></tr></thead><tbody><tr><td>Current Monitor</td> <td>Yes</td> </tr><tr><td>PCB temperature monitor</td> <td>Yes</td> </tr><tr><td>Voltage Monitor</td> <td>Yes</td> </tr></tbody></table><div class="row"> <div class="large-12 columns"> <h4>Ethernet test results</h4> <table class="table performance-table"><thead><tr><td colspan="2">RB1100x4</td> <td colspan="6">AL21400 1G all port test</td> </tr><tr><td rowspan="2">Mode</td> <td rowspan="2">Configuration</td> <td colspan="2">1518 byte</td> <td colspan="2">512 byte</td> <td colspan="2">64 byte</td> </tr><tr><td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> </tr></thead><tbody><tr><td>Bridging</td> <td>none (fast path)</td> <td class="kpps size1518">606.5</td> <td class="mbps size1518">7,365.3</td> <td class="kpps size512">1,736.4</td> <td class="mbps size512">7,112.3</td> <td class="kpps size64">5,509.7</td> <td class="mbps size64">2,821.0</td> </tr><tr><td>Bridging</td> <td>25 bridge filter rules</td> <td class="kpps size1518">606.5</td> <td class="mbps size1518">7,365.3</td> <td class="kpps size512">1,107.8</td> <td class="mbps size512">4,537.5</td> <td class="kpps size64">1,153.2</td> <td class="mbps size64">590.4</td> </tr><tr><td>Routing</td> <td>none (fast path)</td> <td class="kpps size1518">606.5</td> <td class="mbps size1518">7,365.3</td> <td class="kpps size512">1,736.4</td> <td class="mbps size512">7,112.3</td> <td class="kpps size64">5092.3</td> <td class="mbps size64">2,607.3</td> </tr><tr><td>Routing</td> <td>25 simple queues</td> <td class="kpps size1518">606.5</td> <td class="mbps size1518">7,365.3</td> <td class="kpps size512">933.6</td> <td class="mbps size512">3,824.0</td> <td class="kpps size64">960.3</td> <td class="mbps size64">491.7</td> </tr><tr><td>Routing</td> <td>25 ip filter rules</td> <td class="kpps size1518">543.7</td> <td class="mbps size1518">6,602.7</td> <td class="kpps size512">561.8</td> <td class="mbps size512">2,301.1</td> <td class="kpps size64">564.6</td> <td class="mbps size64">289.1</td> </tr></tbody></table><ol class="meta-test"><li>All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)</li> <li>Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes</li> <li>Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out</li> <li>Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results</li> </ol><h4>IPsec test results</h4> <table class="table performance-table"><thead><tr><td colspan="2">RB1100x4</td> <td colspan="6">RB1100AHx4 IPsec throughput</td> </tr><tr><td rowspan="2">Mode</td> <td rowspan="2">Configuration</td> <td colspan="2">1400 byte</td> <td colspan="2">512 byte</td> <td colspan="2">64 byte</td> </tr><tr><td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> </tr></thead><tbody><tr><td>Single tunnel</td> <td>AES-128-CBC + SHA1</td> <td class="kpps size1400">122.0</td> <td class="mbps size1400">1366.4</td> <td class="kpps size512">124.9</td> <td class="mbps size512">511.6</td> <td class="kpps size64">127.0</td> <td class="mbps size64">65.0</td> </tr><tr><td>256 tunnels</td> <td>AES-128-CBC + SHA1</td> <td class="kpps size1400">192.7</td> <td class="mbps size1400">2158.2</td> <td class="kpps size512">200.5</td> <td class="mbps size512">821.2</td> <td class="kpps size64">203.4</td> <td class="mbps size64">104.1</td> </tr><tr><td>256 tunnels</td> <td>AES-128-CBC + SHA256</td> <td class="kpps size1400">192.4</td> <td class="mbps size1400">2154.9</td> <td class="kpps size512">200.5</td> <td class="mbps size512">821.2</td> <td class="kpps size64">203.4</td> <td class="mbps size64">104.1</td> </tr><tr><td>256 tunnels</td> <td>AES-256-CBC + SHA1</td> <td class="kpps size1400">180.0</td> <td class="mbps size1400">2016.0</td> <td class="kpps size512">188.2</td> <td class="mbps size512">770.9</td> <td class="kpps size64">190.3</td> <td class="mbps size64">97.4</td> </tr><tr><td>256 tunnels</td> <td>AES-256-CBC + SHA256</td> <td class="kpps size1400">180.0</td> <td class="mbps size1400">2016.0</td> <td class="kpps size512">188.2</td> <td class="mbps size512">770.9</td> <td class="kpps size64">190.3</td> <td class="mbps size64">97.4</td> </tr><tr><td>256 tunnels</td> <td>AES-128-GCM</td> <td class="kpps size1400">192.7</td> <td class="mbps size1400">2158.2</td> <td class="kpps size512">202.2</td> <td class="mbps size512">828.2</td> <td class="kpps size64">203.4</td> <td class="mbps size64">104.1</td> </tr></tbody></table><ol class="meta-test"><li>All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)</li> <li>Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes</li> <li>Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results</li> </ol></div> </div> <div class="row"> <div class="large-12 columns demo-gallery"> <h4>Included parts</h4> <ul class="small-block-grid-4 included-parts"><li><a href="https://img.routerboard.com/mimg/part601491991700m.jpg"> <img src="https://img.routerboard.com/mimg/part601491991700s.jpg" alt="part601491991700s.jpg" /> K10 R2 screw kit </a></li> <li><a href="https://img.routerboard.com/mimg/part381398168452m.jpg"> <img src="https://img.routerboard.com/mimg/part381398168452s.jpg" alt="part381398168452s.jpg" /> Rack ears </a></li> <li><a href="https://img.routerboard.com/mimg/part41391160693m.jpg"> <img src="https://img.routerboard.com/mimg/part41391160693s.jpg" alt="part41391160693s.jpg" /> IEC cord </a></li> <li><a href="https://img.routerboard.com/mimg/part41391160693m.jpg"> <img src="https://img.routerboard.com/mimg/part41391160693s.jpg" alt="part41391160693s.jpg" /> IEC cord </a></li> </ul></div> </div>
3 246,40 kr