MikroTik/RouterBOARD RB3011UiAS-RM med 1U racklåda och nätdel

m rb3011uias-rm tax

Ny produkt

13 objekt

I Lager

Klarna Från 122,00 kr /mån

2 112,37 kr exkl. moms.

Lägg till i önskelistan

Mer information

The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher
performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an
SFP cage and for the first time a Superspeed full size USB 3.0 port, for adding storage or an external
3G/4G modem.
RB3011UiAS-RM
Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and
PoE output functionality on the last Ethernet port.

Specifications

Product codeRB3011UiAS-RM
CPU nominal frequency1.4 GHz
CPU core count2
Size of RAM1 GB
10/100/1000 Ethernet ports10
Switch chip modelQCA8337-AL3C-R
Power Jack1
PoE inYes (passive only)
PoE outYes (port 10)
Supported input voltage10 V - 30 V
Voltage MonitorYes
PCB temperature monitorYes
Dimensions443x92x44mm
License level5
Operating SystemRouterOS
CPUIPQ-8064
Max Power consumption10W
SFP port1
USB slot typeUSB 3.0 type A
Serial portRJ45

Performance test results

RB3011UiASAll port test RouterOS v6.30rc23
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)325.03,946.8939.83,849.41530.2783.5
Bridging25 bridge filter rules325.03,946.8384.21,573.7348.6178.5
Routingnone (fast path)325.03,946.8939.83,849.41,437.6736.1
Routing25 simple queues325.03,946.8419.61,718.7419.7214.9
Routing25 ip filter rules202.02,453.1204.1836.0188.496.5
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Omdömen

Det finns inga kundrecensioner just nu.

Skriv din recension

MikroTik/RouterBOARD RB3011UiAS-RM med 1U racklåda och nätdel

MikroTik/RouterBOARD RB3011UiAS-RM med 1U racklåda och nätdel

Tillbehör

Kunder som köpt denna produkt köpte också:

MikroTik/RouterBOARD RB3011UiAS-RM med 1U racklåda och nätdel <p>The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher<br />performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an<br />SFP cage and for the first time a Superspeed full size USB 3.0 port, for adding storage or an external<br />3G/4G modem.<br />RB3011UiAS-RM<br />Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and<br />PoE output functionality on the last Ethernet port.</p> <p>Specifications</p> <table border="1"><tbody><tr><td>Product code</td> <td>RB3011UiAS-RM</td> </tr><tr><td>CPU nominal frequency</td> <td>1.4 GHz</td> </tr><tr><td>CPU core count</td> <td>2</td> </tr><tr><td>Size of RAM</td> <td>1 GB</td> </tr><tr><td>10/100/1000 Ethernet ports</td> <td>10</td> </tr><tr><td>Switch chip model</td> <td>QCA8337-AL3C-R</td> </tr><tr><td>Power Jack</td> <td>1</td> </tr><tr><td>PoE in</td> <td>Yes (passive only)</td> </tr><tr><td>PoE out</td> <td>Yes (port 10)</td> </tr><tr><td>Supported input voltage</td> <td>10 V - 30 V</td> </tr><tr><td>Voltage Monitor</td> <td>Yes</td> </tr><tr><td>PCB temperature monitor</td> <td>Yes</td> </tr><tr><td>Dimensions</td> <td>443x92x44mm</td> </tr><tr><td>License level</td> <td>5</td> </tr><tr><td>Operating System</td> <td>RouterOS</td> </tr><tr><td>CPU</td> <td>IPQ-8064</td> </tr><tr><td>Max Power consumption</td> <td>10W</td> </tr><tr><td>SFP port</td> <td>1</td> </tr><tr><td>USB slot type</td> <td>USB 3.0 type A</td> </tr><tr><td>Serial port</td> <td>RJ45</td> </tr></tbody></table><h1>Performance test results</h1> <table class="perf" border="1"><thead><tr><td colspan="2">RB3011UiAS</td> <td colspan="6">All port test RouterOS v6.30rc23</td> </tr><tr><td rowspan="2">Mode</td> <td rowspan="2">Configuration</td> <td colspan="2">1518 byte</td> <td colspan="2">512 byte</td> <td colspan="2">64 byte</td> </tr><tr><td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> </tr></thead><tbody><tr><td>Bridging</td> <td>none (fast path)</td> <td class="kpps size1518">325.0</td> <td class="mbps size1518">3,946.8</td> <td class="kpps size512">939.8</td> <td class="mbps size512">3,849.4</td> <td class="kpps size64">1530.2</td> <td class="mbps size64">783.5</td> </tr><tr><td>Bridging</td> <td>25 bridge filter rules</td> <td class="kpps size1518">325.0</td> <td class="mbps size1518">3,946.8</td> <td class="kpps size512">384.2</td> <td class="mbps size512">1,573.7</td> <td class="kpps size64">348.6</td> <td class="mbps size64">178.5</td> </tr><tr><td>Routing</td> <td>none (fast path)</td> <td class="kpps size1518">325.0</td> <td class="mbps size1518">3,946.8</td> <td class="kpps size512">939.8</td> <td class="mbps size512">3,849.4</td> <td class="kpps size64">1,437.6</td> <td class="mbps size64">736.1</td> </tr><tr><td>Routing</td> <td>25 simple queues</td> <td class="kpps size1518">325.0</td> <td class="mbps size1518">3,946.8</td> <td class="kpps size512">419.6</td> <td class="mbps size512">1,718.7</td> <td class="kpps size64">419.7</td> <td class="mbps size64">214.9</td> </tr><tr><td>Routing</td> <td>25 ip filter rules</td> <td class="kpps size1518">202.0</td> <td class="mbps size1518">2,453.1</td> <td class="kpps size512">204.1</td> <td class="mbps size512">836.0</td> <td class="kpps size64">188.4</td> <td class="mbps size64">96.5</td> </tr></tbody></table><ol class="meta"><li>All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)</li> <li>Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes</li> <li>Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out</li> <li>Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results</li> </ol>
2 112,37 kr