MikroTik/RouterBOARD hAP Lite RB941-2nD-TC

m rb941-2nD-TC

Ny produkt

8 objekt

I lager

Klarna Från 19,00 kr /mån

258,00 kr exkl. moms.

Lägg till i önskelistan

Mer information

The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office.

It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button.

Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.

The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.

Product specifications

Details
Product codeRB941-2nD-TC
CPU nominal frequency650 MHz
CPU core count1
Size of RAM32 MB
10/100 Ethernet ports4
10/100/1000 Ethernet portsNone
MiniPCI slots0
MiniPCI-e slots0
Wireless chip modelQCA9531-BL3A-R
Wireless standards802.11b/g/n
Number of USB ports0
Power Jack1
Supported input voltage5 V - 5 V
PoE inNo
PoE outNo
Voltage MonitorNo
PCB temperature monitorNo
CPU temperature monitorNo
License level4
Antenna gain DBI1.5
Current MonitorNo
CPUQCA9531-BL3A-R
Max Power consumption3W
SFP portsNone
SFP+ portsNone
Number of chains2
Serial portNone

Wireless specifications

2.4 GHz
TXRX
1MBit/s22-96
11MBit/s22-89
6MBit/s20-93
54MBit/s18-74
MCS020-93
MCS716-71

Performance test results

RB941-2nDQCA9531 100M 4 port test
ModeConfiguration64 byte512 byte1518 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)173.688.994.0385.032.5394.8
Bridging25 bridge filter rules56.729.056.1229.832.5394.8
Routingnone (fast path)160.882.394.0385.032.5394.8
Routing25 simple queues72.637.263.7260.932.5394.8
Routing25 ip filter rules34.617.733.8138.432.5394.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Omdömen

Det finns inga kundrecensioner just nu.

Skriv din recension

MikroTik/RouterBOARD hAP Lite RB941-2nD-TC

MikroTik/RouterBOARD hAP Lite RB941-2nD-TC

17 andra produkter i samma kategori:

Kunder som köpt denna produkt köpte också:

MikroTik/RouterBOARD hAP Lite RB941-2nD-TC <p>The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office.</p> <p>It supports button triggered WPS, for the convenience of not typing a complicated password when somebody wants to have wireless internet access, and can also be told to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button.</p> <p>Of course, the device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others.</p> <p>The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.</p> <h1 id="spec">Product specifications</h1> <table class="parameters_table"><tbody><tr><th colspan="2">Details</th></tr><tr><td>Product code</td> <td>RB941-2nD-TC</td> </tr><tr><td>CPU nominal frequency</td> <td>650 MHz</td> </tr><tr><td>CPU core count</td> <td>1</td> </tr><tr><td>Size of RAM</td> <td>32 MB</td> </tr><tr><td>10/100 Ethernet ports</td> <td>4</td> </tr><tr><td>10/100/1000 Ethernet ports</td> <td>None</td> </tr><tr><td>MiniPCI slots</td> <td>0</td> </tr><tr><td>MiniPCI-e slots</td> <td>0</td> </tr><tr><td>Wireless chip model</td> <td>QCA9531-BL3A-R</td> </tr><tr><td>Wireless standards</td> <td>802.11b/g/n</td> </tr><tr><td>Number of USB ports</td> <td>0</td> </tr><tr><td>Power Jack</td> <td>1</td> </tr><tr><td>Supported input voltage</td> <td>5 V - 5 V</td> </tr><tr><td>PoE in</td> <td>No</td> </tr><tr><td>PoE out</td> <td>No</td> </tr><tr><td>Voltage Monitor</td> <td>No</td> </tr><tr><td>PCB temperature monitor</td> <td>No</td> </tr><tr><td>CPU temperature monitor</td> <td>No</td> </tr><tr><td>License level</td> <td>4</td> </tr><tr><td>Antenna gain DBI</td> <td>1.5</td> </tr><tr><td>Current Monitor</td> <td>No</td> </tr><tr><td>CPU</td> <td>QCA9531-BL3A-R</td> </tr><tr><td>Max Power consumption</td> <td>3W</td> </tr><tr><td>SFP ports</td> <td>None</td> </tr><tr><td>SFP+ ports</td> <td>None</td> </tr><tr><td>Number of chains</td> <td>2</td> </tr><tr><td>Serial port</td> <td>None</td> </tr></tbody></table><h1>Wireless specifications</h1> <table class="txtable"><tbody><tr><th colspan="3">2.4 GHz</th></tr><tr><th></th><th>TX</th><th>RX</th></tr><tr><td>1MBit/s</td> <td>22</td> <td>-96</td> </tr><tr><td>11MBit/s</td> <td>22</td> <td>-89</td> </tr><tr><td>6MBit/s</td> <td>20</td> <td>-93</td> </tr><tr><td>54MBit/s</td> <td>18</td> <td>-74</td> </tr><tr><td>MCS0</td> <td>20</td> <td>-93</td> </tr><tr><td>MCS7</td> <td>16</td> <td>-71</td> </tr></tbody></table><h1 id="perf">Performance test results</h1> <table class="perf"><thead><tr><td colspan="2">RB941-2nD</td> <td colspan="2">QCA9531 100M 4 port test</td> <td colspan="4"></td> </tr><tr><td rowspan="2">Mode</td> <td rowspan="2">Configuration</td> <td colspan="2">64 byte</td> <td colspan="2">512 byte</td> <td colspan="2">1518 byte</td> </tr><tr><td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> </tr></thead><tbody><tr><td>Bridging</td> <td>none (fast path)</td> <td class="kpps size64">173.6</td> <td class="mbps size64">88.9</td> <td class="kpps size512">94.0</td> <td class="mbps size512">385.0</td> <td class="kpps size1518">32.5</td> <td class="mbps size1518">394.8</td> </tr><tr><td>Bridging</td> <td>25 bridge filter rules</td> <td class="kpps size64">56.7</td> <td class="mbps size64">29.0</td> <td class="kpps size512">56.1</td> <td class="mbps size512">229.8</td> <td class="kpps size1518">32.5</td> <td class="mbps size1518">394.8</td> </tr><tr><td>Routing</td> <td>none (fast path)</td> <td class="kpps size64">160.8</td> <td class="mbps size64">82.3</td> <td class="kpps size512">94.0</td> <td class="mbps size512">385.0</td> <td class="kpps size1518">32.5</td> <td class="mbps size1518">394.8</td> </tr><tr><td>Routing</td> <td>25 simple queues</td> <td class="kpps size64">72.6</td> <td class="mbps size64">37.2</td> <td class="kpps size512">63.7</td> <td class="mbps size512">260.9</td> <td class="kpps size1518">32.5</td> <td class="mbps size1518">394.8</td> </tr><tr><td>Routing</td> <td>25 ip filter rules</td> <td class="kpps size64">34.6</td> <td class="mbps size64">17.7</td> <td class="kpps size512">33.8</td> <td class="mbps size512">138.4</td> <td class="kpps size1518">32.5</td> <td class="mbps size1518">394.8</td> </tr></tbody></table><ol class="meta"><li>All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)</li> <li>Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes</li> <li>Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out</li> <li>Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results</li> </ol>
258,00 kr