MikroTik/RouterBOARD cAP ac

m RBcAPGi-5acD2nD

Ny produkt

Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output) and 802.11ac support

Mer detaljer

72 objekt

I Lager

Klarna Från 55,00 kr /mån

947,00 kr exkl. moms.

Lägg till i önskelistan

Mer information

The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz and 5 GHz in 802.11ac and legacy standards, and will provide coverage in 360 degrees around it.

Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port.

- cAP ac (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Specifications

Details
Product codeRBcAPGi-5acD2nD
ArchitectureARM 32bit
CPUIPQ-4018
CPU core count4
CPU nominal frequency716 MHz
DimensionsRound case: ⌀ 136 mm, height: 30 mm; Square case: 145 mm x 145 mm x 30 mm
License level4
Operating SystemRouterOS
Size of RAM128 MB
Storage size16 MB
Storage typeFLASH
Tested ambient temperature-40 to 50° C

Powering

Details
Max Power consumption13W
PoE in802.3af/at
PoE outPassive PoE up to 57V
PoE in input Voltage17-57 V
Number of DC inputs1 (PoE-IN)

Wireless

Details
Wireless 2.4 GHz number of chains2
Wireless 2.4 GHz standards802.11b/g/n
Antenna gain dBi for 2.4 GHz2
Wireless 2.4 GHz chip modelIPQ-4018
Wireless 5 GHz number of chains2
Wireless 5 GHz standards802.11ac
Antenna gain dBi for 5 GHz2.5
Wireless 5 GHz chip modelIPQ-4018

Ethernet

Details
10/100/1000 Ethernet ports2

Wireless specifications

2.4 GHzTransmit (dBm)Receive Sensitivity
1MBit/s26-100
11MBit/s26-94
6MBit/s26-96
54MBit/s23-78
MCS026-96
MCS722-73
5 GHzTransmit (dBm)Receive Sensitivity
6MBit/s26-96
54MBit/s21-80
MCS026-96
MCS720-75
MCS918-70

Ethernet test results

RBcAPGi-5acD2nDIPQ-4018 1G all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)162.51973.4469.91924.71484.8760.2
Bridging25 bridge filter rules162.11968.5352.91445.5359.2183.9
Routingnone (fast path)162.51973.4469.91924.71488761.9
Routing25 simple queues162.51973.4469.91924.7506.3259.2
Routing25 ip filter rules162.21969.8240.8986.3242.9124.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

RBcAPGi-5acD2nDIPQ-4018 IPsec throughput
ModeConfiguration1400 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Single tunnelAES-128-CBC + SHA137.9424.559241.761.631.5
256 tunnelsAES-128-CBC + SHA136403.238.5157.739.820.4
256 tunnelsAES-128-CBC + SHA25636403.238.5157.739.820.4
256 tunnelsAES-256-CBC + SHA134.4385.337.9155.239.820.4
256 tunnelsAES-256-CBC + SHA25634.4385.337.9155.239.820.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

Included parts

Omdömen

Det finns inga kundrecensioner just nu.

Skriv din recension

MikroTik/RouterBOARD cAP ac

MikroTik/RouterBOARD cAP ac

Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output) and 802.11ac support

22 andra produkter i samma kategori:

Kunder som köpt denna produkt köpte också:

MikroTik/RouterBOARD cAP ac <p>The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz and 5 GHz in 802.11ac and legacy standards, and will provide coverage in 360 degrees around it.</p> <p>Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port.</p> <p>- cAP ac (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).</p> <h2>Specifications</h2> <table class="table product-table"><thead><tr><th colspan="2">Details</th></tr></thead><tbody><tr><td>Product code</td> <td>RBcAPGi-5acD2nD</td> </tr><tr><td>Architecture</td> <td>ARM 32bit</td> </tr><tr><td>CPU</td> <td>IPQ-4018</td> </tr><tr><td>CPU core count</td> <td>4</td> </tr><tr><td>CPU nominal frequency</td> <td>716 MHz</td> </tr><tr><td>Dimensions</td> <td>Round case: ⌀ 136 mm, height: 30 mm; Square case: 145 mm x 145 mm x 30 mm</td> </tr><tr><td>License level</td> <td>4</td> </tr><tr><td>Operating System</td> <td>RouterOS</td> </tr><tr><td>Size of RAM</td> <td>128 MB</td> </tr><tr><td>Storage size</td> <td>16 MB</td> </tr><tr><td>Storage type</td> <td>FLASH</td> </tr><tr><td>Tested ambient temperature</td> <td>-40 to 50° C</td> </tr></tbody></table><h2>Powering</h2> <table class="table product-table"><thead><tr><th colspan="2">Details</th></tr></thead><tbody><tr><td>Max Power consumption</td> <td>13W</td> </tr><tr><td>PoE in</td> <td>802.3af/at</td> </tr><tr><td>PoE out</td> <td>Passive PoE up to 57V</td> </tr><tr><td>PoE in input Voltage</td> <td>17-57 V</td> </tr><tr><td>Number of DC inputs</td> <td>1 (PoE-IN)</td> </tr></tbody></table><h2>Wireless</h2> <table class="table product-table"><thead><tr><th colspan="2">Details</th></tr></thead><tbody><tr><td>Wireless 2.4 GHz number of chains</td> <td>2</td> </tr><tr><td>Wireless 2.4 GHz standards</td> <td>802.11b/g/n</td> </tr><tr><td>Antenna gain dBi for 2.4 GHz</td> <td>2</td> </tr><tr><td>Wireless 2.4 GHz chip model</td> <td>IPQ-4018</td> </tr><tr><td>Wireless 5 GHz number of chains</td> <td>2</td> </tr><tr><td>Wireless 5 GHz standards</td> <td>802.11ac</td> </tr><tr><td>Antenna gain dBi for 5 GHz</td> <td>2.5</td> </tr><tr><td>Wireless 5 GHz chip model</td> <td>IPQ-4018</td> </tr></tbody></table><h2>Ethernet</h2> <table class="table product-table"><thead><tr><th colspan="2">Details</th></tr></thead><tbody><tr><td>10/100/1000 Ethernet ports</td> <td>2</td> </tr></tbody></table><h2>Wireless specifications</h2> <table class="table product-table"><thead><tr><th>2.4 GHz</th><th>Transmit (dBm)</th><th>Receive Sensitivity</th></tr></thead><tbody><tr><td>1MBit/s</td> <td>26</td> <td>-100</td> </tr><tr><td>11MBit/s</td> <td>26</td> <td>-94</td> </tr><tr><td>6MBit/s</td> <td>26</td> <td>-96</td> </tr><tr><td>54MBit/s</td> <td>23</td> <td>-78</td> </tr><tr><td>MCS0</td> <td>26</td> <td>-96</td> </tr><tr><td>MCS7</td> <td>22</td> <td>-73</td> </tr></tbody></table><table class="table product-table"><thead><tr><th>5 GHz</th><th>Transmit (dBm)</th><th>Receive Sensitivity</th></tr></thead><tbody><tr><td>6MBit/s</td> <td>26</td> <td>-96</td> </tr><tr><td>54MBit/s</td> <td>21</td> <td>-80</td> </tr><tr><td>MCS0</td> <td>26</td> <td>-96</td> </tr><tr><td>MCS7</td> <td>20</td> <td>-75</td> </tr><tr><td>MCS9</td> <td>18</td> <td>-70</td> </tr></tbody></table><div class="content active" id="testresults"> <div class="row"> <div class="large-12 columns"> <h2>Ethernet test results</h2> <div class="table-wrapper"> <table class="table performance-table"><thead><tr><td colspan="2">RBcAPGi-5acD2nD</td> <td colspan="6">IPQ-4018 1G all port test</td> </tr><tr><td rowspan="2">Mode</td> <td rowspan="2">Configuration</td> <td colspan="2">1518 byte</td> <td colspan="2">512 byte</td> <td colspan="2">64 byte</td> </tr><tr><td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> </tr></thead><tbody><tr><td>Bridging</td> <td>none (fast path)</td> <td class="kpps size1518">162.5</td> <td class="mbps size1518">1973.4</td> <td class="kpps size512">469.9</td> <td class="mbps size512">1924.7</td> <td class="kpps size64">1484.8</td> <td class="mbps size64">760.2</td> </tr><tr><td>Bridging</td> <td>25 bridge filter rules</td> <td class="kpps size1518">162.1</td> <td class="mbps size1518">1968.5</td> <td class="kpps size512">352.9</td> <td class="mbps size512">1445.5</td> <td class="kpps size64">359.2</td> <td class="mbps size64">183.9</td> </tr><tr><td>Routing</td> <td>none (fast path)</td> <td class="kpps size1518">162.5</td> <td class="mbps size1518">1973.4</td> <td class="kpps size512">469.9</td> <td class="mbps size512">1924.7</td> <td class="kpps size64">1488</td> <td class="mbps size64">761.9</td> </tr><tr><td>Routing</td> <td>25 simple queues</td> <td class="kpps size1518">162.5</td> <td class="mbps size1518">1973.4</td> <td class="kpps size512">469.9</td> <td class="mbps size512">1924.7</td> <td class="kpps size64">506.3</td> <td class="mbps size64">259.2</td> </tr><tr><td>Routing</td> <td>25 ip filter rules</td> <td class="kpps size1518">162.2</td> <td class="mbps size1518">1969.8</td> <td class="kpps size512">240.8</td> <td class="mbps size512">986.3</td> <td class="kpps size64">242.9</td> <td class="mbps size64">124.4</td> </tr></tbody></table></div> <ol class="meta-test"><li>All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)</li> <li>Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes</li> <li>Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out</li> <li>Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results</li> </ol><h2>IPsec test results</h2> <div class="table-wrapper"> <table class="table performance-table"><thead><tr><td colspan="2">RBcAPGi-5acD2nD</td> <td colspan="6">IPQ-4018 IPsec throughput</td> </tr><tr><td rowspan="2">Mode</td> <td rowspan="2">Configuration</td> <td colspan="2">1400 byte</td> <td colspan="2">512 byte</td> <td colspan="2">64 byte</td> </tr><tr><td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> <td>kpps</td> <td>Mbps</td> </tr></thead><tbody><tr><td>Single tunnel</td> <td>AES-128-CBC + SHA1</td> <td class="kpps size1400">37.9</td> <td class="mbps size1400">424.5</td> <td class="kpps size512">59</td> <td class="mbps size512">241.7</td> <td class="kpps size64">61.6</td> <td class="mbps size64">31.5</td> </tr><tr><td>256 tunnels</td> <td>AES-128-CBC + SHA1</td> <td class="kpps size1400">36</td> <td class="mbps size1400">403.2</td> <td class="kpps size512">38.5</td> <td class="mbps size512">157.7</td> <td class="kpps size64">39.8</td> <td class="mbps size64">20.4</td> </tr><tr><td>256 tunnels</td> <td>AES-128-CBC + SHA256</td> <td class="kpps size1400">36</td> <td class="mbps size1400">403.2</td> <td class="kpps size512">38.5</td> <td class="mbps size512">157.7</td> <td class="kpps size64">39.8</td> <td class="mbps size64">20.4</td> </tr><tr><td>256 tunnels</td> <td>AES-256-CBC + SHA1</td> <td class="kpps size1400">34.4</td> <td class="mbps size1400">385.3</td> <td class="kpps size512">37.9</td> <td class="mbps size512">155.2</td> <td class="kpps size64">39.8</td> <td class="mbps size64">20.4</td> </tr><tr><td>256 tunnels</td> <td>AES-256-CBC + SHA256</td> <td class="kpps size1400">34.4</td> <td class="mbps size1400">385.3</td> <td class="kpps size512">37.9</td> <td class="mbps size512">155.2</td> <td class="kpps size64">39.8</td> <td class="mbps size64">20.4</td> </tr></tbody></table></div> <ol class="meta-test"><li>All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)</li> <li>Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes</li> <li>Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results</li> </ol></div> </div> </div> <h2>Included parts</h2> <ul class="small-block-grid-2 medium-block-grid-7 included-parts"><li><a href="https://img.routerboard.com/mimg/part331393422988m.jpg"> <img src="https://img.routerboard.com/mimg/part331393422988s.jpg" alt="part331393422988s.jpg" /><br />24V 1.2A power adapter </a></li> <li><a href="https://img.routerboard.com/mimg/part701512042489m.jpg"> <img src="https://img.routerboard.com/mimg/part701512042489s.jpg" alt="part701512042489s.jpg" /><br />Ceiling mount </a></li> <li><a href="https://img.routerboard.com/mimg/part111391160732m.jpg"> <img src="https://img.routerboard.com/mimg/part111391160732s.jpg" alt="part111391160732s.jpg" /><br />Gigabit PoE injector </a></li> <li><a href="https://img.routerboard.com/mimg/part631497341156m.jpg"> <img src="https://img.routerboard.com/mimg/part631497341156s.jpg" alt="part631497341156s.jpg" /><br />K-46 screw kit </a></li> </ul>
947,00 kr