MikroTik/RouterBOARD cAP
    • MikroTik/RouterBOARD cAP
    • MikroTik/RouterBOARD cAP

    cAP

    400,00 kr
    Exkl. moms 1-3

    Ceiling AP, Dual-Chain 2.4GHz, 650MHz CPU, RouterOS L4, 802.3at/af support

    Kvantitet
    I Lager

     

    Order vardag före 12.00 går normalt samma dag med Postnord. Fri frakt över 4000kr

     

    All retur ska godkännas av oss sänd mail till info@shlab.se

    RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.

    cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.

    Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

    Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.

    Specifications

    Details
    Product codeRBcAP2nD
    ArchitectureMIPS-BE
    CPUQCA9533
    CPU core count1
    CPU nominal frequency650 MHz
    Dimensions185mm diameter, 31mm height
    License level4
    Operating SystemRouterOS
    Size of RAM64 MB
    Storage size16 MB
    Storage typeFLASH
    Tested ambient temperature-40C to +70C

    Powering

    Details
    Max Power consumption4W
    Number of DC inputs1 (PoE-IN)
    PoE in802.3af/at
    PoE in input Voltage11-57 V

    Wireless

    Details
    Wireless 2.4 GHz number of chains2
    Wireless 2.4 GHz standards802.11b/g/n
    Antenna gain dBi for 2.4 GHz2
    Wireless 2.4 GHz chip modelQCA9533

    Ethernet

    Details
    10/100 Ethernet ports1

    Wireless specifications

    2.4 GHzTransmit (dBm)Receive Sensitivity
    1MBit/s22-96
    11MBit/s22-89
    6MBit/s20-93
    54MBit/s18-74
    MCS020-93
    MCS716-71

    Ethernet test results

    RBcAP2nDQCA9533 100M one port test
    ModeConfiguration1518 byte512 byte64 byte
    kppsMbpskppsMbpskppsMbps
    Bridgingnone (fast path)8.198.423.596.3173.688.9
    Bridging25 bridge filter rules8.198.423.596.370.936.3
    Routingnone (fast path)8.198.423.596.3160.882.3
    Routing25 simple queues8.198.423.596.390.846.5
    Routing25 ip filter rules8.198.423.596.343.222.1
    1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
    2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
    3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
    4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
    MikroTik
    m rbcap2nD
    19 objekt
    2015-07-09

    Nerladdning

    Produkt blad cap

    Produkt blad cAP

    Nerladdning (454.92k)