MikroTik/RouterBOARD hAP ac lite tower RB952Ui-5ac2nD (int)
    • MikroTik/RouterBOARD hAP ac lite tower RB952Ui-5ac2nD (int)
    • MikroTik/RouterBOARD hAP ac lite tower RB952Ui-5ac2nD (int)
    • MikroTik/RouterBOARD hAP ac lite tower RB952Ui-5ac2nD (int)
    • MikroTik/RouterBOARD hAP ac lite tower RB952Ui-5ac2nD (int)
    • MikroTik/RouterBOARD hAP ac lite tower RB952Ui-5ac2nD (int)
    • MikroTik/RouterBOARD hAP ac lite tower RB952Ui-5ac2nD (int)

    hAP ac lite tower RB952Ui-5ac2nD (int)

    427,00 kr
    Exkl. moms 1-3

    Mängdrabatter

    KvantitetRabattDu Sparar
    205%Upp till 427,00 kr
    Kvantitet
    I lager

     

    Order vardag före 12.00 går normalt samma dag med Postnord. Fri frakt över 4000kr

     

    All retur ska godkännas av oss sänd mail till info@shlab.se

    hAP ac lite tower

    The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time.

    Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.

    New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.

    RB952Ui-5ac2nD-TC (International) supports 2412-2484MHz and 5150MHz - 5875MHz range.

    Product specifications

    Details
    Product codeRB952Ui-5ac2nD-TC
    CPU nominal frequency650 MHz
    CPU core count1
    Size of RAM64 MB
    10/100 Ethernet ports5
    Wireless standards802.11a/n/ac
    Wireless chip modelQCA-9887
    Secondary wireless standards802.11b/g/n
    Secondary wireless chip modelQCA9531
    Number of USB ports1
    Power Jack1
    PoE inYes
    PoE outYes
    Supported input voltage10 V - 30 V
    Dimensions34 x 119 x 98mm
    Operating SystemRouterOS
    License level4
    Antenna gain DBI2
    CPUQCA9531
    Max Power consumption8W
    USB Power ResetYes
    USB slot typeUSB type A
    Number of chains1
    Storage typeFLASH
    Storage size16 MB

    Wireless specifications

    2.4 GHz
    Transmit power (dBm)Receive SensitivityTransmit power (mW)
    1MBit/s22-96158
    11MBit/s22-89158
    6MBit/s20-93100
    54MBit/s18-7463
    MCS020-93100
    MCS716-7140
    5 GHz
    Transmit power (dBm)Receive SensitivityTransmit power (mW)
    6MBit/s23-93200
    54MBit/s20-75100
    MCS023-93200
    MCS719-7179
    MCS916-6340

    wireless parameters may be limited in software, depending on your local regulatory limitations

    Ethernet test results

    RB952Ui-5ac2nD-TCQCA9531 (650Mhz) 100M all port test
    ModeConfiguration1518 byte512 byte64 byte
    kppsMbpskppsMbpskppsMbps
    Bridgingnone (fast path)40.6493.0117.4480.9217.0111.1
    Bridging25 bridge filter rules40.6493.070.1287.170.936.3
    Routingnone (fast path)40.6493.0117.4480.9200.8102.8
    Routing25 simple queues40.6493.079.6326.090.846.5
    Routing25 ip filter rules40.6493.042.2172.843.222.1
    1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
    2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
    3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
    4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

    MikroTik
    m rb952ui-5ac2nDint tax
    29 objekt
    2019-01-02