wsAP ac lite
    • wsAP ac lite
    • wsAP ac lite
    • wsAP ac lite
    • wsAP ac lite

    wsAP ac lite

    490,00 kr
    Exkl. moms 1-3

    In-wall Dual Concurrent 2.4GHz / 5GHz wireless access point with three Ethernet ports and telephone jack pass through for hospitality networks

    Kvantitet
    I Lager

     

    Order vardag före 12.00 går normalt samma dag med Postnord. Fri frakt över 4000kr

     

    All retur ska godkännas av oss sänd mail till info@shlab.se

    The wsAP ac lite is a perfect access point (AP) for hospitality networks (hotels, shopping malls, hospitals, airports etc.). It has an unobtrusive case that fits in standard wall power sockets. This way, the unit doesn’t attract attention and blends into any environment.

    The wsAP has three Ethernet ports: one on the back side for easy PoE-in, and two LAN ports behind the front door. The device provides Dual concurrent 2.4 GHz and 5 GHz WiFi coverage, it supports 802.11ac, as well as legacy standards. A USB 2.0 port is provided, to charge mobile devices or for storage.

    The device also has a pass through telephone jack (RJ11) to connect a desktop phone in a hotel room, for easier cable management. As a separate accessory you can order a special screw set (product code K50), that ensures the bottom door can only be opened by the owner. Mounting bracket fits US and EU most popular telecomunication sockets.

    Specifications

    Details
    Product codeRBwsAP-5Hac2nD
    ArchitectureMIPSBE
    CPUQCA9531
    CPU core count1
    CPU nominal frequency650 MHz
    Dimensions112 x 126 x 30 mm
    License level4
    Operating SystemRouterOS
    Size of RAM64 MB
    Storage size16 MB
    Storage typeFLASH
    Tested ambient temperature-40°C .. +60°C

    Powering

    Details
    Max Power consumption10W
    PoE in802.3af/at
    PoE outPassive PoE
    PoE in input Voltage18-57 V
    Number of DC inputs1 (PoE-IN)

    Wireless

    Details
    Wireless 2.4 GHz number of chains2
    Wireless 2.4 GHz standards802.11b/g/n
    Antenna gain dBi for 2.4 GHz1.5
    Wireless 2.4 GHz chip modelQCA9531
    Wireless 5 GHz number of chains1
    Wireless 5 GHz standards802.11a/n/ac
    Antenna gain dBi for 5 GHz3
    Wireless 5 GHz chip modelQCA-9887

    Ethernet

    Details
    10/100 Ethernet ports3

    Peripherals

    Details
    Number of USB ports1
    USB Power ResetYes
    USB slot typeUSB type A
    Max USB current (A)0.5

    Wireless specifications

    2.4 GHzTransmit (dBm)Receive Sensitivity
    1MBit/s22-96
    11MBit/s22-89
    6MBit/s20-93
    54MBit/s18-74
    MCS020-93
    MCS716-71
    5 GHzTransmit (dBm)Receive Sensitivity
    6MBit/s23-93
    54MBit/s20-75
    MCS023-93
    MCS719-71
    MCS916-63

    Ethernet test results

    RBwsAP-5Hac2nDQCA9531 100M three port test
    ModeConfiguration1518 byte512 byte64 byte
    kppsMbpskppsMbpskppsMbps
    Bridgingnone (fast path)24.4296.370.5288.8387.8198.6
    Bridging25 bridge filter rules24.4296.370.5288.886.544.3
    Routingnone (fast path)24.4296.370.5288.8220.4112.8
    Routing25 simple queues24.4296.370.5288.8130.766.9
    Routing25 ip filter rules24.4296.357.7236.358.830.1
    1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
    2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
    3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
    4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
    MikroTik
    m RBwsAP-5Hac2nD
    35 objekt
    2018-05-24